BLUEROCK ® Tools Model SL-1.25 Seam Locker

Specifications:

• Lock Capacity: 0.8mm-1.25mm
• 22-19 gauge Galvanized Steel
• 21-18 Gauge Standard Steel
• (See other model SL-1.0 for thinner 28-20 gauge Galvanized, 26-20 gauge Standard steel)
• Height of Flange (the metal edge to be folded over): 10-13mm ONLY (See other model SL-1.0 for 6-11mm flange height)
• Material Tensile Strength: 0.03-0.05 Inch 
• Motor Data: 120v, 60Hz, 11.6 Amps, 1400W, Standard US Grounded Plug
• Machine Speed 150RPM Single Speed Gearbox
• Working Speed: 13-23 ft/min
• Inner Radius: Min 5.9"
• Outer Radius: Min 11.8"
• G. W.: 19 lbs
• N. W.: 12 lbs

The purpose of the SL-1.25 Seam Locker is to fold and close longitudinal Pittsburgh lock joints/seams on ductwork, e.g. ventilation ducts, housings, containers, etc. This creates a clean and uniform folded seam. This machine does not create a Pittsburgh seam, only folds the seam. The machine will automatically adjust itself for sheet thickness as long as it is within specifications. The quality of the locking seam depends on the height of flange. If flange is too large or too small, the lock seam cannot close properly. 

This is a brand NEW BLUEROCK Tools Seam Locker Model SL-1.25  It comes with a plastic carrying case for protection during shipping.

FOR SHIPPING OUTSIDE OF CONTINENTAL UNITED STATES PLEASE CONTACT FOR SHIPPING QUOTATION, IF NOT OTHERWISE SPECIFIED IN ITEM DESCRIPTION.

Operating Manual SL-1.25 Seam Locker